Products.
Controllers.
The iBLOC controller
The iBLOC lighting controller has been created to facilitate the remote control of street lighting. It is available in multiple variants, which allow the user to control the lighting with the DALI 1…10 V power supply and to manage other components of luminaires (e.g. NTC thermistors). Thread radio communication enabled by iBLOC means, that the user can send commands and congurations, as well as receive alerts pertaining to events and current parameter values. iBLOC can be sold as a separate product for assembly in luminaires from different manufacturers, it is also used as a controller in LUG luminaires.
The eBLOC controller
Luminaire controller with NEMA or Zhaga standard connector
- 2.4GHz radio controller with communication with a router in the THREAD standard (radio-mesh)
– Optionally equipped with LTE-M communication module for communication with the cloud
– Optionally equipped with a GPS locator - Luminaire power control by means of the DALI interface or 1..10V output
- Option to measure the power consumed by the luminaire, measure current, voltage, active, reactive and apparent power and power factor (in the NEMA version)
- Real time clock with sustained operation after a power outage
- Relay output for complete disconnection of the luminaire power supply (NEMA version)
- Dedicated to the BIOTcloud lighting control system
- Lifetime up to 100,000 h
- Up to 5 years warranty
HUBs.
HUBIoT-1
HUBIoT is a hub (also called a gateway or a router) which allows the BIOTcloud servers (and the user) to communicate with Thread devices such as iBLOC via the Internet (through GSM or Ethernet). HUBIoT has 2 independent radio modules for Thread communication, which means that communication between Thread clusters does not require communication with servers. Therefore, it is possible to implement functions such as tracking lighting – which works in real time with no supervision from the cloud.
HUBIoT-2
HUBIoT is a hub (also called a gateway or a router) which allows the BIOTcloud servers (and the user) to communicate with Thread devices such as iBLOC via the Internet (through GSM or Ethernet). HUBIoT-2 enables the connection of secondary devices via the RS-485 interface. This could be, for instance, an iNET-3P power supply meter which monitors the 3-phase power supply line for the lighting.
Additional devices.
Power meter for cabinets INET-3P
HUBIoT is a hub (also called a gateway or a router) which allows the BIOTcloud servers (and the user) to communicate with Thread devices such as iBLOC via the Internet (through GSM or Ethernet). HUBIoT has 2 independent radio modules for Thread communication, which means that communication between Thread clusters does not require communication with servers. Therefore, it is possible to implement functions such as tracking lighting – which works in real time with no supervision from the cloud.
T. +48 538 898 302
© 2019-2022 BIOT Sp. z o.o. Grupa LUG, Nowy Kisielin – Nowa 7, 66-002 Zielona Góra, Polska
